Datalogic QuickScan Lite QW2100 - Manual (Page 190)

Symbologies
180 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Codabar — cont.
Codabar Set Length 1
This feature specifies one of the bar code lengths for Codabar Length Control . Length 1 is
the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed
Length Mode. Length includes the bar code’s start, stop, check and data characters. The length
must include at least one data character.
The length can be set from 3 to 50 characters. See Set Length 1 on page 268 for more
detailed programming instructions.
$CCBL1
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT 03 = Length 1 is 3 Characters