Datalogic QuickScan Lite QW2100 - Manual (Page 41)

Scanning Features
Product Reference Guide 31
ENTER/EXIT PROGRAMMING MODE
Stand Mode Triggered Timeout
This feature specifies the time to remain in Trigger Single mode after the trigger is pulled
while in Autosense® Stand Mode .
NOTE
This timeout is only used when the Scan Mode is configured as Auto-
sense® Stand Mode .
$CSNOT01 
Stand Mode Triggered Timeout = 0.5 Seconds
$CSNOT03 
Stand Mode Triggered Timeout = 1.5 Seconds
$CSNOT04 
Stand Mode Triggered Timeout = 2 Seconds
$CSNOT06 
Stand Mode Triggered Timeout = 3 Seconds
$CSNOT08 
Stand Mode Triggered Timeout = 4 Seconds
DEFAULT