Datalogic QuickScan Lite QW2100 - Manual (Page 59)

ACK NAK Options
Product Reference Guide 49
ENTER/EXIT PROGRAMMING MODE
ACK NAK Retry Count
This feature specifies the number of times the reader retries a label transmission due to a retry
condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and
a selection of 255 specifies unlimited retries. See
ACK NAK Retry Count on page 254 for
more detailed programming instructions.
$CR2AR
Select ACK NAK Retry Count Setting
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then
start again at the beginning.
~
CANCEL
DEFAULT 003 = 3 Retries