Datalogic QuickScan Lite QW2100 - Manual (Page 160)

Symbologies
150 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Code 128 — cont.
Code 128 Set Length 2
This feature specifies one of the bar code lengths for Code 128 Length Control . Length 2 is
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Length includes the bar code’s data characters only.
The length can be set from 1 to 80 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
Set Length 2 on page 269 for more detailed programming
instructions.
$CC8L2
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT 80 = Length 2 is 80 Characters