Datalogic 2 of 5 set length 1, Default, Datalogic 2 of 5 — cont – Datalogic QuickScan Lite QW2100 User Manual
Page 177
Datalogic 2 of 5
Product Reference Guide
167
ENTER/EXIT PROGRAMMING MODE
Datalogic 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for
Datalogic 2 of 5 Length Control
.
Length 1 is the minimum label length if in
Mode, or the first fixed length if
Mode. The length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters in increments of two. See
for more detailed programming instructions.
$CD2L1
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
06 = Length 1 is 6 Characters