Good read led duration, Default – Datalogic QuickScan Lite QW2100 User Manual
Page 39
LED and Beeper Indicators
Product Reference Guide
29
ENTER/EXIT PROGRAMMING MODE
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on following a good
read. The good read LED on time can be set within a range of 0.1 to 25.5 seconds in 100ms
increments. See
Good Read LED Duration on page 245
for more detailed programming
instructions.
$CLAGL
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
020 = Good Read LED stays on for 2
seconds.
NOTE
Indicators are dimmed during sleep.