PLANET SG-4800 - Manual (Page 81)

Gigabit SSL VPN Security Router User’s Manual
8.1.3 Smart QoS
Item Description
Enabled QoS Choose to apply QoS function.
When the usage of any WAN’s
bandwidth is over___%, Enable Smart
QoS
Input the required rate value into the column. The default is 60%.
Each IP’s upstream bandwidth
threshold (for all WAN)
Input the max. upstream rate for intranet IPs.
Each IP’s downstream bandwidth
threshold (for all WAN)
Input the max. downstream rate for intranet IPs.
Each IP’s bandwidth is over maximum
threshold, its maximum bandwidth will
remain
When any IP uses more bandwidth than the above upstream or
downstream settings, the IP will be restricted for the following
upstream or downstream bandwidth settings.
Penalty Mechanism
After choosing “Enabled Penalty Mechanism”, the device will
enable the penalty conditions internally. When the IP still uses
more upstream or downstream bandwidth than the setting, the
device will execute the penalty conditions automatically.
Show Penalty List
The IPs which are under penalty mechanism will be shown on
the list.
- 75 -