PLANET SG-4800 - Manual (Page 130)

Gigabit SSL VPN Security Router User’s Manual
Item Description
Authentication
Type
Select the authentication service type you wish to use from the drop down menu.
Domain Names Name the selected authentication server.
LDAP Srv
Address
Enter authentication server address.
LDAP Base DN
Enter LDAP authentication server’s authentication domain name (LDAP BaseDN*).
Apply Click on the "Apply" tab to save changes
Cancel Click "Cancel" to clear any recent changes to the settings.
One Click
SSL VPN provides one-click setting. With fewest configurations, all users can use SSL tunnels to access an
open internal resource. While in "All Users" group, the authentication server settings support the current
enterprise authentication server. So all users, after being identified via the authentication server, will be directed
to the portal and can use the full range of enterprise resources. For Authentication server settings, see step one
below: Domain Management.
If you don't want all users to access the full range of available resources, go to "All Users" group settings to
disable or modify settings in sequential order according to the following steps.
If you want to use the one-click function, after you have added new authentication servers, complete the setup
by assigning the All Users group authentication server to the newly created authentication server.
Note: All of the users in this authentication server can link to the web portal and access all of the enterprise
resources pre-determined by administrators. Administrators do not need to define settings for step 2 (User
management) and step 3 (Service resources management).
- 124 -