PLANET SG-4800 - Manual (Page 157)

Gigabit SSL VPN Security Router User’s Manual
Item Description
Dest. IP
Subnet Mask
Input the remote network IP locations and subnet that is to be routed. For example, the
IP/subnet is 192.168.2.0/255.255.255.0.
Gateway The default gateway location of the network node which is to be routed.
Hop Count
This is the router layer count for the IP. If there are two routers under the device, users
should input “2” for the router layer; the default is “1”. (Max. is 15.)
Interface This is to select “WAN port” or “LAN port” for network connection location.
Add to List Add the routing rule into the list.
Delete Selected
Item
Remove the selected routing rule from the list.
Show Table Show current routing table.
Apply Click “Apply” to save the network configuration modification
Cancel Click “Cancel" to leave without making any changes.
- 151 -