PLANET SG-4800 - Manual (Page 105)

Gigabit SSL VPN Security Router User’s Manual
If the remote IP address is unknown, choose IP by DNS Resolved, allowing DNS to
translate the IP address. This domain name must be available on the Internet. When
users finish the setting, the corresponding IP address will be displayed under the
remote gateway of Summary.
(3) IP + E-mail Addr. (USER FQDN) Authentication :
If users select IP address and E-mail type, entering the IP address and the E-mail
allows users to gain access to this tunnel.
If the remote IP address is unknown, choose IP by DNS Resolved, allowing DNS to
translated the IP address. This domain name must be available on the Internet. When
users finish the setting, the corresponding IP address will be displayed under the
remote gateway of Summary.
(4) Dynamic IP + Domain Name(FQDN) Authentication:
If users use dynamic IP address to connect with the device, users may select the
combination of the dynamic IP address, host name and domain name.
(5) Dynamic IP + E-mail Addr. (USER FQDN) Authentication.
If users use dynamic IP address to connect with the device, users may select this type
to link to VPN. When the remote VPN gateway requires connection to facilitate VPN
connection, the device will start authentication and respond to the VPN tunnel
connection; Please enter the E-Mail to the empty space.
Remote Security
This option allows users to set the remote VPN connection access type. The following
- 99 -