Chapter 3 hardware installation, 1 installing the device on a standard 19” rack, Chapter 3: hardware installation – PLANET SG-4800 User Manual
Page 15: Nstalling the, Evice on a, Tandard
Gigabit SSL VPN Security Router User’s Manual
- 9 -
Chapter 3: Hardware Installation
In this chapter we are going to introduce hardware interface as well as physical installation.
3.1 Installing the Device on a Standard 19” Rack
We suggest to either place the device on a desk or install it in a rack with attached brackets. Do not place
other heavy objects together with the device on a rack. Overloading may cause the rack to fail, thus causing
damage or danger.
Each device comes with a set of rack installation accessories, including 2 L brackets and 8 screws. Users can
rack- mount the device onto the chassis.
Refer to the figure below for the device installation onto a 19” rack:
"
Attention
In order for the device to run smoothly, wherever users install it, be sure not to obstruct the vent
on each side of the device. Keep at least 10cm space in front of both the vents for air
convection.