PLANET SG-4800 - Manual (Page 37)

Gigabit SSL VPN Security Router User’s Manual
Transparent Bridge
If all Intranet IP addresses are applied as Internet IP addresses, and users don’t want to substitute private
network IP addresses for all Intranet IP addresses (ex. 192.168.1.X), this function will enable users to
integrate existing networks without changing the original structure. Select the Transparent Bridge mode for
the WAN connection mode. In this way, users will be able to connect normally with the Internet while keeping
the original Internet IP addresses in Intranet IP configuration.
If there are two WANs configured, users still can select Transparent Bridge mode for WAN connection mode,
and load balancing will be achieved as usual.
Item Description
WAN IP Address Input one of the static IP addresses issued by ISP.
Subnet Mask
Input the subnet mask of the static IP address issued by ISP, such as:
Issued eight static IP addresses: 255.255.255.248 Issued 16 static IP
addresses: 255.255.255.240
Default Gateway Address
Input the default gateway of the static IP address issued by ISP. For ADSL
users, it is usually an ATU-R IP address.
- 31 -