beautypg.com

PLANET SG-4800 User Manual

Page 31

background image

Gigabit SSL VPN Security Router User’s Manual

Item

Description

Use the following DNS

Server Addresses:

Select a user-defined DNS server IP address.

DNS Server:

Input the DNS IP address set by ISP. At least one IP group should be input.

The maximum acceptable groups is two IP groups.

Enable Line-Dropped

Scheduling:

The WAN disconnection schedule will be activated by checking this option. In

some areas, there is a time limitation for WAN connection service. For

example:

The optical fiber service will be disconnected from 0:00 am to 6:00 am.

Although there is a standby system in the device, at the moment of WAN

disconnection, all the external connections that go through this WAN will be

disconnected too. Only after the disconnected lines are reconnected can they

go through the standby system to connect with the Internet.

Therefore, to avoid a huge number of disconnection, users can activate this

function to arrange new connections to be made through another WAN to the

Internet. In this way, the effect of any disconnection can be minimized.

Line-Dropped Period

Input the time rule for disconnection of this WAN service.

Line-Dropped

Scheduling

Input how long the WAN service may be disconnected before the newly added

connections should go through another WAN to connect with the Internet.

Link Backup Interface

Select another WAN port as link backup when port binding is configured. Users

should select the port that employs the same ISP.

Shared- Circuit WAN

environment

If your WAN connects to a Switch, select “Enabled” to filter broadcast packets.

The default is “Disabled”.

MTU:

MTU is abbreviation of Maximum Transmission Unit. “Auto” and “Manual” can

be chosen. The default value is 1500. Different value could be set in different

network environment. (e.g. ADSL PPPoE MTU: 1492) .The default is “Auto”.

After the changes are completed, click “Apply” to save the configuration, or click “Cancel" to leave without

making any changes.

Static IP

If an ISP issues a static IP (such as one IP or eight IP addresses, etc.), please select this connection mode

and follow the steps below to input the IP numbers issued by an ISP into the relevant boxes.

- 25 -

This manual is related to the following products: