PLANET SG-4800 - Manual (Page 101)

Gigabit SSL VPN Security Router User’s Manual
Item Description
Tunnel No. Set the embedded VPN feature, please select the Tunnel number.
Tunnel Name Displays the current VPN tunnel connection name, such as XXX Office. Users are
well-advised to give them different names to avoid confusion.
"
Note
If this tunnel is to be connected to the other VPN device, some device
requires that the tunnel name is identical to the name of the host end
to facilitate verification. This tunnel can thus be successfully enabled.
Interface From the pull-down menu, users can select the Interface for this VPN tunnel.
Enabled
Click to activate the VPN tunnel. This option is set to activate by default.
Afterwards, users may select to activate this tunnel feature.
Local VPN Group Setting
This Local Security Gateway Type must be identical with that of the remote type (Remote Security Gateway
Type).
Item Description
Local Security This local gateway authentication type comes with five operation modes, which are:
Gateway Type
IP only IP + Domain Name (FQDN) Authentication
IP + E-mail Addr. (USER FQDN) Authentication Dynamic IP + Domain Name (FQDN)
Authentication Dynamic IP + E-mail Addr. (USER FQDN) Authentication. Dynamic IP
address + Email address name
(1) IP only:
If users decide to use IP only, entering the IP address is the only way to gain access to
this tunnel. The WAN IP address will be automatically filled into this space. Users don't
need to do further settings.
(2) IP + Domain Name(FQDN) Authentication:
If users select IP + domain name type, please enter the domain name and IP address.
The WAN IP address will be automatically filled into this space. Users don't need to do
- 95 -