PLANET SG-4800 - Manual (Page 153)

Gigabit SSL VPN Security Router User’s Manual
Item Description
Service To select from this option the default list of service ports of the virtual host that users
want to activate.
Such as: All (TCP&UDP) 0~65535, 80 (80~80) for WWW, and 21~21 for FTP. Please
refer to the list of default service ports.
IP Address Input the virtual host IP address.
Interface Select the WAN port.
Enabled Activate this function.
Service
Management
Add or remove service ports from the list of service ports.
Add to list
Add to the active service content.
Service Port Management
The services in the list mentioned above are frequently used services. If the service users want to activate is
not in the list, we recommend that users use “Service Port Management” to add or remove ports, as follows:
Item Description
Service Name Input the name of the service port users want to activate on the list, such as E-donkey,
etc.
Protocol
To select whether a service port is TCP or UDP.
Port Range To activate this function, input the range of the service port locations users want to
- 147 -