Chapter 4 login vpn security router, Chapter 4: login vpn security router – PLANET SG-4800 User Manual
Page 17

Gigabit SSL VPN Security Router User’s Manual
Chapter 4: Login VPN Security Router
This chapter is mainly introducing Web-based UI after connecting VPN Router.
First, check up VPN Router IP address by connecting to DOS through the LAN PC under VPN Security
Router. Go to Start → Run, enter cmd to commend DOS, and enter ipconfig for getting Default Gateway
address, as the graphic below, 192.168.1.1. Make sure Default Gateway is also the default IP address of VPN
QoS Router.
"
Attention
When not getting IP address and default gateway by using “ipconfig”, or the received IP
address is 0.0.0.0 and 169.X.X.X, we recommend that users should check if there is any
problem with the circuits or the computer network card is connected nicely.
Then, open webpage browser, IE for example, and key in 192.168.1.1 in the website column. The login
window will appear as below:
- 11 -