PLANET SG-4800 - Manual (Page 160)

Gigabit SSL VPN Security Router User’s Manual
"
Attentio
n
One-to-One NAT mode will change the firewall working mode. If this function has been set up,
the Internet IP server or PC which is mapped with a LAN port will be exposed on the Internet.
To prevent Internet users from actively connecting with the One-on-One NAT server or PC,
please set up a proper denial rule for access, as described Firewall.
Multiple to One NAT
Item Description
Enable Multiple
to One NAT
Click to enable multiple to one NAT function.
Private IP Range Input intranet IPs for NAT mapping.
Respective
Public IP
Input the respective public IP addresses. This should go along with the following
interface selection. If the IP address is not within the interface ranges, the setting will
not work.
Interface
Select the mapping interface. If the WAN IP above is not within the interface range, the
setting will not work.
Add to List
Add this configuration to the One-to-One NAT list.
Delete selected Remove a selected One-to-One NAT list.
- 154 -