PLANET SG-4800 - Manual (Page 114)

Gigabit SSL VPN Security Router User’s Manual
connection, this device will start authentication and respond to this VPN tunnel
connection; if users select this option to link to VPN, please enter the domain name.
(5) Dynamic IP + E-mail Addr. (USER FQDN) Authentication.
If users use dynamic IP address to connect to the device, users may select this option
to connect to VPN without entering IP address. When VPN Gateway requires for VPN
connection, the device will start authentication and respond to VPN tunnel connection; if
users select this option to link to VPN, enter E-Mail address to the empty field for E-Mail
authentication.
IPSec Setup
If there is any encryption mechanism, the encryption mechanism of these two VPN tunnels must be identical in
order to create connection. And the transmission data must be encrypted with IPSec key, which is known as the
encryption "key". The device provides the IKE automatic encryption mode- IKE with Preshared Key (automatic).
Encryption Management Protocol
When users set this VPN tunnel to use authentication mode, users must set the parameter of this exchange
password with that of the remote
- 108 -