PLANET SG-4800 - Manual (Page 124)

Gigabit SSL VPN Security Router User’s Manual
Item Description
Assign
All authentication servers with defined settings will be displayed on Domain
Management list. You are required to choose one authentication server to be assigned
to this group. Each group can only be assigned to one type of authentication
server. Default is Local Database. If there are changes to the domain servers
designated by All Users, other groups that have yet to enable will also be modified
accordingly.
Domain Names Display all authentication server names.
Authentication
Type
Display authentication server type.
Authentication
server IP
Display external authentication server IP addresses. If the Authentication Type is Local
Database, the authentication server IP address will not be displayed.
User Database
For external authentication servers, the user database will be: "Apply User Database”
and "Customize User Database".
Click "Apply User database", then there is no need to establish additional user data,
and the system will directly apply the external authentication server's internal user
database settings. As long as the users belong to this authentication server group,
they can use the group's resources.
Note: If multiple groups designate the same authentication server for users, only one
group will be able to use the built-in user database at one time. For this reason, it is
recommended that the largest group be designated to use the built-in user database
and other smaller groups use the "Customize User Database".
Select the "Customize User Database", the administrator must add a new user to the
group (See step two: User management). If users have not been set by the
administrator, users of the authentication server can still pass the authentication, but
they will not be able to access the web portal to use internal enterprise resources.
Edit Click on the "Edit" tab to make changes to the server addresses and authentication
domain names. Authentication server type and authentication service name cannot be
altered. If you want to change the authentication server type and authentication
service name, delete them, and then set up a new authentication server.
- 118 -