PLANET SG-4800 User Manual
Page 47
Gigabit SSL VPN Security Router User’s Manual
for Netcom and Telecom can be divided.
Set WAN Grouping
If more than one WAN is connected with Netcom, to apply a similar division of traffic policy to these WANs, a
combination for the WANs must be made. Click “Set WAN Grouping”; an interactive window as shown in the
figure below will be displayed.
Item
Description
Name
To define a name for the WAN grouping in the box, such as “Education” etc.
The name is for recognizing different WAN groups.
Interface
Check the boxes for the WANs to be added into this combination.
Add To List
To add a WAN group to the grouping list.
Delete selected Item
To remove selected WANs from the WAN grouping.
Apply
Click “Apply” to save the modification.
Close
Click “Cancel” to cancel the modification. This only works before “Apply” is
clicked.
After the configuration is completed, in the China Netcom Policy window users can select WANs in
combination to connect with Netcom.
- 41 -