PLANET SG-4800 - Manual (Page 58)

Gigabit SSL VPN Security Router User’s Manual
up to 100 services into the list.
Delete selected service To remove the selected activated Services.
Apply Click the “Apply” button to save the modification.
Cancel Click the “Cancel” button to cancel the modification. This only works before
“Apply” is clicked.
Auto Load Balance mode when enabled
The collocation of the Auto Load Balance Mode and the Auto Load Mode will enable more flexible use of
bandwidth. Users can assign specific Intranet IP addresses to specific destination application service ports or
assign specific destination IP addresses to the WAN users choose for external connections.
Example 1:How do I set up Auto Load Balance Mode to assign the Intranet IP 192.168.1.100 to WAN2
for the Internet?
As in the figure below, select “All Traffic” from the pull-down option list “Service”, and then in the boxes of
“Source IP” input the source IP address “192.168.1.100” to “100”. Retain the original numbers “0.0.0.0” in the
boxes of “Destination IP” (which means to include all Internet IP addresses). Select WAN2 from the pull-down
option list “Interface”, and then click “Enable”. Finally, click “Add New” and the rule will be added to the mode.
- 52 -