PLANET SG-4800 - Manual (Page 23)

Gigabit SSL VPN Security Router User’s Manual
configuration is “On”.
Prevent ARP Virus
Attack
Indicates that preventing Arp virus attack is acitvated. The default configuration
is “Off”.
Remote Management Indicates if remote management is activated (on or off). Click the hyperlink to
enter and manage the configuration. The default configuration is “Off”.
Access Rule Indicates the number of access rule applied in VPN Security Router.
5.1.5 VPN Status
Item Description
VPN Setting Status Indicates VPN setting information in VPN Router.
Tunnel(s) Used Indicates number of tunnels that have been configured in VPN (Virtual Private
Network).
Tunnel(s) Available Indicates number of tunnels that are available for VPN (Virtual Private
Network).
5.1.6 Log Setting Status
Item Description
Sent Log To
Indicates if Syslog Server is Enabled or Disabled.
5.2 Change and Set Login Password and Time
5.2.1 Password Setting
When you login VPN Router setting window every time, you must enter the password. The default value for
VPN Router username and password are both “admin”. For security reasons, we strongly recommend that
you must change your password after first login. Please keep the password safe, or you might not login to
VPN Router. You can press Reset button for more than 10 sec, VPN Router will return back to default.
- 17 -