Epson PhotoPC 3100Z - Manual (Page 90)

Selecting Images for Printing 8-4
3 Press the button under
ADJUST . You see the
following menu.
4 Press the buttons next to
Brightness and Sharpness to
change their settings to
Std.
(standard), High , or Low .
5 Press the button next to the up arrow to increase the
number of copies, or press the button next to the down
arrow to decrease the number of copies.
6 Press the button under BACK to return to the main
PRINT IMAGE menu. You see a yellow icon next to
the number of copies in the corner of the image. (The
icon does not appear if both settings are
Std.)
Enabling an Index Print
1 Set the camera dial to and press the POWER button.
2 You see the PRINT IMAGE
menu.
3 Press the button next to the
index setting to change it to
Index On . Press the button
again to turn the index print
off.
/HJHQGERRN 3DJH 0RQGD\ $SULO 30