Epson PhotoPC 3100Z - Manual (Page 54)

Framing, Focusing, and Zooming 4-5
Adjusting the Focus Manually
The PhotoPC 3100Z lets you manually select a fixed focus.
1 Make sure that the camera is set to Manual user mode.
(See page 1-10 for details.)
2 Turn the camera dial to or .
If you are taking pictures using the viewfinder (with the
camera dial set to ), press the
MENU button.
If you are taking pictures with the LCD screen, you see
the View menu.
3 Press the button under MENU CHANGE. You see one
of the following screens:
4 Press the buttons next to the up and down arrows to
select a manual focus setting.
If the camera is set to Off (macro mode off), you can
choose from the following settings:
AF The camera determines the focus automatically.
Focal point is about three feet.
Focal point is about 10 feet.
Focus is infinity.
If you’re using the On (macro mode on), you can
choose one of the following settings:
AF The camera determines the focus automatically.
M1 Focal point is about 8 inches.
M2 Focal point is about 20 inches.
5 Press the shutter button halfway to lock the camera’s
exposure settings. When the camera locks its settings,
the photo capture light stops flashing and you see a
green circle
on the screen. You can reframe your
picture while holding the button down.
6 Press the button all the way down to capture the image.
LCD Screen Viewfinder
/HJHQGERRN 3DJH 0RQGD\ $SULO 30