Epson PhotoPC 3100Z - Manual (Page 64)

Adjusting Exposure and Color Settings 5-7
Adjusting the Sensitivity Setting
With the PhotoPC 3100Z’s high
sensitivity settings, you can take pictures
of fast-moving subjects, or indoor or low
light pictures without a flash. You can set
the sensitivity from the camera’s standard
ISO equivalent of 100 to an ISO
equivalent of 200 or 400.
The arrow icons below ISO indicate the sensitivity setting:
The standard setting is equivalent to ISO 100. This
is the recommended setting for most pictures.
The high sensitivity setting is equivalent to
ISO 200.
The super high sensitivity setting is equivalent to
ISO 400.
NOTE
Image quality is lower when you use high sensitivity settings.
To adjust the sensitivity setting:
1 Make sure the camera is set to Program or Manual user
mode. (See page 1-10 for instructions.)
2 Turn the camera dial to or .
If you are taking pictures using the viewfinder (with the
camera dial set to ), press the
MENU button.
If you are taking pictures with the LCD screen, you see
the View menu with a preview of your image.
3 Do one of the following:
◗ If the user mode is set to Program, press the button
under
ISO to change the sensitivity setting.
LCD Screen Viewfinder
/HJHQGERRN 3DJH 0RQGD\ $SULO 30