TA Triumph-Adler DCC 2520 User Manual
Page 97

Troubleshooting
4-5
Call for Service
Maintenance by qualified service personnel is required.
Contact your service representative, an authorized
service center or the place of purchase. If [C] and a
4-digit number are displayed as well, inform the service
personnel of the displayed number.
______
Time for maintenance
Time for scheduled
maintenance
Maintenance by qualified service personnel is required.
Contact your service representative, an authorized
service center or the place of purchase.
______
Communication Error
An error has occurred during a fax transmission or fax
reception. Check the error code – that indicates the
origin of the error – on the corresponding Transmission
Report (or Reception Report) that is printed out in order
to confirm the cause of the error.
No DC Loop
No Dial Tone
The modular cord may not be connected properly to
either the telephone or the line jack (L) on the fax. Either
that, or there is a problem with the telephone line. In this
case, contact your telephone company.
______
No Response
Dialing was accomplished, but connection to the other
party was not possible. Check with the other party.
______
No encryption code is
registered.
The destination was dialed using a one-touch key that
was designated for Encrypted Transmission, but the
Encrypted Transmission was not possible because the
corresponding Encryption Key is no longer registered in
your fax.
Message
Procedure
Page