TA Triumph-Adler DCC 2520 - Manual (Page 147)

Other Features of this Fax
5-45
4 Press the [Program] key.
5 If you do NOT want to designate a time
of day for the operation to begin, press
the [Off] key under Delayed TX and go
directly to step 7.
6 Use the numeric keys to enter the desired time of day for the operation to begin.
NOTE: If you want to change the entered time, use the [] and/or [] keys to move the cursor to
the desired location.
7 Press the [Send] key or the [RX Polling] key to choose the type of transmission.
8 Press the [Next] key.
9 Enter the destination fax number.
NOTE: You can enter the fax number using the numeric keys, abbreviated numbers, one-touch
keys or the address book. Chain dial keys can be used as well.
If you want to enter multiple fax numbers with the numeric keys, press the [Next destinat.] ([Next
dest.]) key after each fax number.
10 Press the [Finish dest. Set] ([Dest. set]) key.
11 Enter a name for the program and the [Next] key. (Maximum 20 characters)
NOTE: In order to enter characters, refer to Entering Characters on page 2-15.)
12 Check the currently registered information and press the key that corresponds to any item that you
want to modify.
13 Press the [OK] key. The message display will return to the same screen as was displayed in step 3.
Dial type
Group
Register the dial.
33600bps One-touch
key
Chain
Program
Back
Delayed TX/TX type
Off 08:00 .
Off
Delayed TX
Enter using # key.
On
Back
Register the dial.
Program Dial(Send) 0006 .
Start Time Send
RX Polling
TX type
FREE
Program Dial(Send)
Enter Destination.
Register the dial.
book
Address Abbrev.
Delete Space Pause Subadd.
ABC
ABC
0006 .
Dest . 1
destinat.
Next
GDE