Other features of this fax 5-32, Press the [subadd.] key, Press the [on] key – TA Triumph-Adler DCC 2520 User Manual
Page 134: Press the [password] key, For fax transmission, Ready for fax transmission

Other Features of this Fax
5-32
NOTE: You can also enter the fax number using one-touch keys that have been designated for
F-Code Based Communication as well. If you do use such a one-touch key, press the Start key and
the transmission operation will begin automatically.
3
Press the [Subadd.] key.
4
Press the [On] key.
5
Use the numeric keys to enter the
appropriate subaddress.
NOTE: This subaddress is required during an F-Code Based Communication in order to designate
the box in the destination party's fax. It can be up to 20 digits in length and can include any
combination of the numerals 0 - 9.
You can use the [] and/or [] keys to move the cursor to a desired location, and you can clear the
entered number by pressing the [Delete] key.
6
Press the [Password] key.
7
If necessary, use the numeric keys to enter the predetermined F-Code password.
NOTE: The password can be up to 20 digits in length and can include any combination of the
numerals 0 - 9 and the symbols * and #.
This password is not required if you agree in advance with the destination party not to use one.
8
Press the [Close] key.
The message display will return to the same screen as was displayed in step 2. You can now
change any transmission settings that you want or set the time for the transmission to begin.
9
Press the Start key. The transmission operation will
begin.
key to transmit
.
0%
for fax transmission.
Application
Duplex
Register
Re-dial
On-hook
TX
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
OCT-11-2005 16:00
1234_
.
Delayed TX
Orig. size
setting
Orig image
quality
Exposure
mode
8½×11"
Normal
Regular
Delete
Space
Pause
Subadd.
Next des
Subaddress TX
Off
_
.
Enter using # key.
On
Back
Memory
OCT-11
Delete
Ready for fax transmission.
Subaddress
Password
(MAX. 20 dig
(MAX. 20 dig