TA Triumph-Adler DCC 2520 - Manual (Page 106)

Other Features of this Fax
5-4
Automatically Switching Between the Fax and an Answering Machine (TAD
Reception)
This reception mode is convenient for using a separately purchased telephone with answering
machine capabilities together with this fax. If an incoming call is from a fax machine, fax reception
will begin automatically. If the call is from a telephone, the functions of the answering machine will
engage, so, even if you cannot answer, the caller will be able to leave a message.
NOTE: TAD Reception is only possible if a separately purchased telephone with answering
machine capabilities is connected to this fax machine.
Refer to the Instruction Manual for the telephone in use for details on recording and listening to
messages, etc.
BE SURE that the number of times your answering machine is set to ring is LESS than the number
of times the fax is set to ring.
If you have selected TAD Reception as the current reception mode, MAKE SURE that, in the first
minute after the telephone answers the incoming call, there are no silent pauses of 9 seconds or
more [6 seconds or more for metric versions] in either the message you record or the message you
receive. If there is such a pause, the silence detection function of this fax will be activated and the
fax machine will switch to fax reception.
Reception flow
Preparation
Make sure that Answering Machine is
displayed on the basic fax screen. If it is
not, press the reception mode select key
and then press the [Answering Machine]
key.
Fax
If the other party is sending
documents using an automatic
fax transmission mode...
The other party’s documents will be
automatically received.
Fax
If the other party is sending
documents using a manual fax
transmission mode...
The answering
machine will play
your message.
The answering
machine will
record the other
party’s message.
If the other party
initiates a fax
transmission, fax
reception will start
automatically.
Telephone
If the other party is calling from
a telephone...
riginal & assign destination.
. 0% for fax transmission.
Application
Abbrev.
Register
Re-dial
On-hook
Dest.
check
Memory TX
Machine
Answering
Print Report
Memory usage:
OCT-11-2005 16:00
TX
setting