TA Triumph-Adler DCC 2520 - Manual (Page 155)

Other Features of this Fax
5-53
1 Press the [Register] key. The Register
screen will appear.
2 Press the [TX/RX Restrict.] key.
3 Press the [Permit ID No.] key.
4 Press an unregistered key. The
information will be displayed for all keys
that have already been registered.
5 Use the numeric keys to enter the desired 4-digit Permit ID. If you want to change the entered
number, use the [] and/or [] keys to move the cursor to the desired location.
6 Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 4. If you want to continue registering other Permit IDs, repeat steps 4 through 6. If you are
finished registering Permit IDs, press the Reset key.
Modifying or Deleting Permit IDs
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Perform steps 1 through 3 of Registering New Permit IDs on page 5-52.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TX Address
Register
setting book
Print Report
Memory
OCT-11
Info.
Location
Dial
Basic Application Register
Box Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
FAX
Network
Item option
Register in TX/RX Restriction list.
FAX No.
Permit
ID No.
Permit
FAX No.
Reject
Permit List
Register in TX/RX Restriction list.
0101 . #01
#02
#03
#04
#05 0202 . 5555.