TA Triumph-Adler DCC 2520 - Manual (Page 84)

Fax Operation (Various Functions)
3-18
Managing Information for a Scheduled Communication (Editing a
Communication in Memory)
You can modify certain information relating to a scheduled communication that uses the timer or
even cancel the communication completely. You can also print out a sample image of the
corresponding documents as well as initiate (force-start) the communication without waiting for the
actually scheduled start time.
NOTE: If the scheduled communication begins automatically while you are in the middle of any
editing operation, it will impossible to continue that procedure.
Printing Out a Sample Image of Waiting Documents
If you want to check the documents that correspond to a specific transmission that is in memory and
waiting for transmission, you can print out a sample page of those documents.
NOTE: Even if you print out a sample image of the documents, the transmission will be carried out
on schedule.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Press the [Application] key. The
Application screen will appear.
2 Press the [Reserved TX status] key.
The content of the first schedule
communication will be displayed.
3 Use the [T] and/or [S] cursor keys to
switch to the communication that you
want.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TX Address
Register
setting book
Print Report
Memory
OCT-11
RX Polling
TX Polling
Basic Application Register
box input
Sub.conf.
TX status
Reserved
on LCD
TX result
on LCD
RX result
data box
Print encr
box output
Sub.conf.
Memory
OCT-11
Print Report
Option screen
Select item.
123456
Reservation status
Reserved communication status.
Doc #:
Memory
OCT-11
1/2 .
Send
TX No.of pages: 001 . 22:22 .
025 .
Start Time:
001 . (No.party: )