TA Triumph-Adler DCC 2520 - Manual (Page 157)

Other Features of this Fax
5-55
2 Press the [TX/RX Restrict.] key.
3 Press the [Reject FAX No.] key.
4 Press an unregistered key. The
information will be displayed for all keys
that have already been registered.
5 Use the numeric keys to enter the
desired Reject Fax Number. (Maximum
20 digits)
You can use the [I] and/or [J] keys to
move the cursor to a desired location,
and you can clear the entered number
by pressing the [Delete] key.
6 Press the [OK] key. The message display will return to the same screen as was displayed in step 4.
If you want to continue registering other Reject Fax Numbers, repeat steps 4 through 6. If you are
finished registering Reject Fax Numbers, press the Reset key.
Modifying or Deleting Reject Fax Numbers
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Perform steps 1 through 3 of Registering New Reject Fax Numbers on page 5-54.
Info.
Location
Dial
Basic Application Register
Box Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
FAX
Network
Item option
Register in TX/RX Restriction list.
FAX No.
Permit
ID No.
Permit
FAX No.
Reject
Reject FAX No.
Register in TX/RX Restriction list.
12345678901234567890 . #01
#02
#03
#04
#05
06123456 .
Delete
Enter using # key.
Detail contents Back
Register in TX/RX Restriction list.
Rejected FAX number
. _
(MAX. 20 digits)
002 .