TA Triumph-Adler DCC 2520 - Manual (Page 196)

Various Settings and Registration
7-14
Turning Reception Date & Time Print Out ON/OFF (RX Date/Time setting)
Select here whether or not you want information – such as the time of the reception, information
related to the transmitting party and the number of pages transmitted – to be printed out at the top
edge of received documents. This information is convenient for checking the actual time you
received documents, especially when they were sent from a location that is in a different time zone
than you are. In order to have this information printed out, it is necessary to turn this function ON
here in advance.
NOTE: If a received page is split and printed onto 2 or more separate sheets of paper, the time and
date of reception will be printed only on the first of those sheets.
If Fax Forwarding is turned ON, the true date and time of reception at this fax will not be printed out
on the documents received at the selected destination. If, however, the forwarding operation is
unsuccessful even after redialing the predetermined number of times, the reception date and time
information WILL be displayed on the documents that will then be automatically printed out at this
fax.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Press the System Menu/Counter key. The Default
Setting screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] key until RX Date/Time is highlighted.
4 Press the [Change #] key.
5 Select whether you want to turn
Reception Date and Time Print Out ON
or OFF by pressing either the [ON] or
[OFF] key, as appropriate.
6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
Print
System Menu / Counter
RX Date/Time
On
Off
Back
Default setting screen