Modifying or deleting f-code relay boxes, Modifying or deleting f-code relay boxes -28 – TA Triumph-Adler DCC 2520 User Manual
Page 130

Other Features of this Fax
5-28
2
If you entered the fax number with the numeric keys, press the [Next destinat.] ([Next dest.])
key.
9
Press the [Finish dest. Set] ([Dest. set]) key.
10
Select whether or not you want the
received documents to be printed out at
your fax (press the [On] key to have
them printed and the [Off] key to stop
print out), and whether or not you want
send a Transmission Report regarding
the results of the final transmissions to
the initial transmitting station (press the
[On] key to send a report and the [Off]
key to not send a report.).
11
Press the [Next] key.
If you selected to send a Transmission Report to the initial transmitting station, go to the next step. If
you selected NOT to send a report, proceed directly to step 14.
12
Enter the fax number of the initial transmitting station.
NOTE: You can use the numeric keys, one-touch keys and Chain dial keys to enter the fax number.
13
Press the [Finish dest. Set] ([Dest. set]) key.
14
Check the registered information.
Each item can be modified.
15
Press the [OK] key. The message display will return to the same screen as was displayed in step 4.
If you want to continue registering other F-Code Relay Boxes, repeat steps 4 through 15. Once you
are finished registering F-Code Relay Boxes, press the Reset key.
Modifying or Deleting F-Code Relay Boxes
Perform the following procedure when you want to add or delete final destinations or change other
information registered under any F-Code Relay Box, as well as when you want to completely delete
one of those boxes.
NOTE: In order to modify the contents of or completely delete an F-Code Relay Box, it is necessary
to enter the corresponding F-Code password during the procedure.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Perform steps 1 through 3 of Registering New F-Code Relay Boxes on page 5-26.
2
Press the key which displays the
subaddress for the F-Code Relay Box
you want to modify or delete.
Date/Time
Off
Print Here
Back
Register box
On
02
.
Subaddress relay box
Off
On
Return report
Subaddress relay box
Register box
8888
.
0715
.
3333
.