TA Triumph-Adler DCC 2520 - Manual (Page 131)

Other Features of this Fax
5-29
3 Enter the F-Code password (4-digits) for
that F-Code Relay Box.
4 Press the [Confirm] key.
5 If you want to completely delete the
F-Code Relay Box, press the [Delete]
key and go to the next step. If you want
to modify the information for that F-Code
Relay Box, press the [Change contents]
key and go to step 7.
> Deleting an F-Code Relay Box
6 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2.
If you are finished deleting F-Code Relay Boxes, press the Reset key.
> Modifying information
7 If you want to change the final destination fax numbers, press the [] key and go to the next step. If
you want to modify any other basic information, press the key that corresponds to that information
and refer to Registering New F-Code Relay Boxes on page 5-26.
Deleting destinations
8 Press the destination that you want to
delete until it is highlighted. Multiple
selections are available. If the
destination you want to delete is not
displayed, use the [T] and/or [S] cursor
keys to switch to the screen that displays
the destination that you want.
9 To delete the selected destination(s), press the [Delete] key and then the [Yes] key.
Adding destinations
10 Press the [Add] key.
( 4 digits)
Enter password using # key.
Password confirmation Back
Register box
Subaddress relay box
_ .
01 .
Contents change/del.
Change
contents
Back
Register box
Subaddress relay box
Delete
01 .
3333 .
3333 .
Subaddress
Password
0002 .
Add/change/del des. Back
Register box
Subaddress relay box
*0002 .
Memory
OCT-11
12345678 .
1/1 .
01 .
Close el des. Back
x
relay box
*0002 .
Change
Add
Delete
Memory usage:
OCT-11-2005 16:00
12345678 .
1/1 .
. 0%
01 .