TA Triumph-Adler DC 2116 - Manual (Page 84)

Various Functions of this Fax
3-16
4 Press the S key or the T key to select the document
number that corresponds to the communication you
want to modify.
5 Press the Enter key. The items available for modification will appear in the message display.
O Changing the scheduled start time
6 If you want to change the scheduled start time, press
the S key or the T key to select TX Time. Then press
the Enter key.
If you DO NOT want to change the start time, this step
is not necessary. Proceed to step 9.
7 Use the keypad to enter the desired time for the
communication to begin.
If you want to reset the displayed time to “00:00”,
simply press the Stop/Clear key.
8 Press the Enter key. The new time for the communication to begin will be registered.
If you are finished modifying the contents of the communication, proceed to step 38.
O Adding fax numbers
9 Press the S key or the T key to select Broadcast
List and press the Enter key.
10 If you want to add fax numbers, press the S key or the
T key to select Add destination [Add
attention].
If you DO NOT want to add fax numbers, this step is
not necessary. Proceed to step 19.
11 Press the Enter key.
12 Enter the additional fax number.
13 If you want to designate the communication for this fax
number as a Subaddress Communication, press the
Sub-Address key.
If you DID NOT press the Sub-Address key, proceed
to step 16.
:26585632
Doc # :003
Program/Change:List
22:22 Send
P01
Program/Change TX:
End
:26585632
TX Time :22:22
TX Time:22:22
Enter TX Time
Program/Change Broadcast:
End
TX Time :22:22
Broadcast List
Broadcast List:
End
Add destination
Change/Delete
:
Enter Fax No.