TA Triumph-Adler DC 2116 - Manual (Page 176)

Various Settings and Registration
7-6
Setting the Number of Rings [FAX/TEL Switching] ("Number of Rings" setting)
When a separately purchased telephone is connected to this fax machine and Auto FAX/TEL
Switching is turned ON, the number of times the fax will let the telephone ring before the Auto
FAX/TEL Switching mode engages can be set here to any number between 0 – 15. After the
number of rings designated here, if the call is from a facsimile this fax will switch to fax reception. If
other party is on the line, the telephone will begin to ring again. (See Automatically Switching
Between the Fax and a Telephone (Auto FAX/TEL Switching) on page 5-1.)
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the S key or the T key to select
#Rings(AutoRX)[Nr rings-AutRX].
5 Press the Enter key.
6 Press the S key or the T key to select the number of
times the fax will let the telephone ring.
The asterisk (*) in the message display indicates the
current setting.
If you select 0 Times, the Auto FAX/TEL Switching
mode will engage as soon as a call comes in.
7 Press the Enter key. The setting for the number of rings in the Auto FAX/TEL Switching mode is
complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
# of Rings
#Rings(TAD)
#Rings(AutoRX)
: 2Times
:10Times
: 2Times
# of Rings (Auto Switch):
0Times
1Times
2Times *