TA Triumph-Adler DC 2116 - Manual (Page 182)

Various Settings and Registration
7-12
Selecting the Automatic Reception Mode ("Receive Mode" setting)
This fax has 2 or 3 automatic reception modes (depending upon the model version). The inch
version of this fax offers the Automatic Fax Reception, Auto FAX/TEL Switching and D.R.D.
Reception modes. The metric version contains the Automatic Fax Reception and Auto FAX/TEL
Switching modes. Select from among the available modes that are available for your fax machine.
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the S key or the T key to select Receive
Mode [Reception mode].
5 Press the Enter key.
6 Press the S key or the T key to select the desired
reception mode.
The asterisk (*) in the message display indicates the
current setting.
> D.R.D. was selected: Proceed to step 7.
> If any reception mode other than D.R.D.was selected: Proceed to step 9.
7 Press the Enter key.
8 Press the S key or the T key to select the desired ring
pattern.
Select among the 4 available patterns: Normal Ring,
Double Ring, Short-Short-Long and
Short-Long-Short.
9 Press the Enter key. The setting for the reception mode is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
Scan from ADF
TX/Default
Receive Mode
:Memory
:Fax Recept
:Std size
Receive Mode:
Auto Fax/Tel SW
Fax Reception
D.R.D.
*
D.R.D. Ring Pattern:
Double Ring
Normal Ring
Short-Short-Long