TA Triumph-Adler DC 2116 - Manual (Page 196)

Network FAX Settings (Option)
9-4
Making the Initial Settings on the Fax Machine
Turning Network FAX Reception ON/OFF
Turn this setting ON in order to perform Network FAX Reception. You can also select whether to
have received documents printed out automatically or not.
Note If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the S key or the T key to select NW-FAX RX.
5 Press the Enter key.
6 Press the S key or the T key to select whether to turn
Network FAX Reception On or Off.
The asterisk (*) in the message display indicates the
current setting.
Selecting On(Local Print ON) will cause incoming
faxes to be automatically printed out, while selecting On(Local print OFF) will save incoming
fax data into a selected folder without printing them out.
7 Press the Enter key. The setting for Network FAX Reception is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
2 in 1 RX
Fax Bulk RX
NW-FAX RX
:Off
:On(Off)
:Off
On (Local Print ON)
On (Local print OFF)
NW-FAX RX
Off
*