TA Triumph-Adler DC 2116 - Manual (Page 136)

Other Features of this Fax
5-40
Saving Specific Communication Settings as a Single Program (Program Keys)
The operational procedures for various types of communication, such as Broadcast Transmission,
Polling Reception, etc., can be registered under a one-touch key that will then function as a program
key for one-touch operation. This is convenient for those operations that are performed often – or on
a regular basis – to the same destination or at the same time each day, etc.
The following 3 methods of communication can be registered under a program key.
A. Standard Transmission
B. Broadcast Transmission
C. Polling Reception
Important! • Group dial keys cannot be used to enter fax numbers for the communication method listed as A
above.
• Chain dial and group dial keys CANNOT be used in combination during entry of any one fax
number.
• For more detailed information on each communication method, refer to the explanation that
particular function.
Registering New Program Keys
Notes • You can designate any number of the 32 one-touch keys as program keys.
• It is not necessary for you to register a name for each program. However, if you do register a
program name, you will be able to use the directory to search for the related program.
• If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
1 Open the cover plate to the left and press the Register
key.
2 Press the S key or the T key to select Program
Program key.
3 Press the Enter key.
4 Press an unregistered one-touch key.
Program:
Program 1-Touch Key
Program Group Key
Program Program Key