TA Triumph-Adler DC 2116 - Manual (Page 178)

Various Settings and Registration
7-8
Making Volume Settings ("Volume" setting)
The volume of the alarm, the monitor and the speaker can be adjusted here, or you can make the
alarm inaudible.
Sets the volume of the alarm that sounds in the event of a communications error or when you press
an incorrect key on the operation panel.
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line
when the On-Hook key was NOT pressed.
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line
when the On-Hook key WAS pressed.
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the S key or the T key to select Set Volume.
5 Press the Enter key.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
#Rings(AutoRX)
Dial Confirm
Set Volume
: 2Times
:On