TA Triumph-Adler DC 2116 - Manual (Page 188)

Various Settings and Registration
7-18
Registering the Remote Test ID ("Remote Test ID" setting)
Notes • A previously registered Remote Test ID can also be modified by performing the following
procedure.
• If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
1 Open the cover plate to the left and press the Register
key.
2 Press the S key or the T key to select Program Fax
Parameter.
3 Press the Enter key.
4 Press the S key or the T key to select Remote Test
ID.
5 Press the Enter key.
6 Use the keypad to enter the designated 4-digit Remote
Test ID.
If you want to reset the displayed number to “0000”,
simply press the Stop/Clear key.
7 Press the Enter key. Registration of the Remote Test ID is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
Program:
Program encryption box
Program Fax Parameter
Program Encryption ID
Program Fax Parameter:
Remote Switch
Remote Test ID
Fax Forwarding
:0000
:55
Remote Test ID:0000
Enter Remote ID