RIGOL DS1000D - Manual (Page 78)

RIGOL Command Systems
Programming Guide for DS1000E, DS1000D Series 2-66
Function Explanation:
The command queries the negative duty cycle of the waveform under measure.
could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 5.00e-01.
20. :MEASure:PDELay?
Command Format:
:MEASure:PDELay? []
Function Explanation:
The command queries the delay relative to rising edge of channel1 or channel 2.
could be CHANnel1 or CHANnel2.
Returned Format:
Such as: <-1.00e-04.
21. :MEASure:NDELay?
Command Format:
:MEASure:NDELay? []
Function Explanation:
The command queries the delay relative to falling edge of channel1 or channel 2.
could be CHANnel1 or CHANnel2.
Returned Format:
Such as: <1.00e-04.
22. :MEASure:TOTal
Command Format:
:MEASure:TOTal {ON|OFF}
:MEASure:TOTal?