RIGOL DS1000D - Manual (Page 125)

Programming Guide for DS1000E, DS1000D Series
3-21
Program in Visual Basic 6.0
Open Visual Basic 6.0, take the following steps:
1. Create a Standard EXE project.
2. Choose Project→Add Module→Existing; find the “visa.bas” file in the
filefolder of include under the path of NI-VISA and add;
3. Add two Command Buttons and Lables to the demo, each button denotes
each channel, and each Label denotes different states (yellow and light blue
which is the channel’s color indicates opening, while gray indicates close) of the
channels. See the figure below.