Trigger control, Trigger control -22, Trigger:mode – RIGOL DS1000D User Manual

Page 34: Trigger:source

RIGOL Command Systems

Programming Guide for DS1000E, DS1000D Series

2-22

Trigger Control

1. :TRIGger:MODE

Command Format:
:TRIGger:MODE
:TRIGger:MODE?

Function Explanation:
The commands set and query the mode of trigger. could be EDGE,
PULSe, VIDEO, SLOPe, PATTern, DURation or ALTernation.

Returned Format:
The query returns EDGE, PULSE, VIDEO, SLOPE, PATTERN, DURATION or
ALTERNATION.

Example:
:TRIG:MODE EDGE

Setup the trigger mode as EDGE.

:TRIG:MODE?

The query returns EDGE.

2. :TRIGger:SOURce

Command Format:
:TRIGger:SOURce
:TRIGger:SOURce?

Function Explanation:
The commands set and query the trigger source. could be the input
channel (CHANnel1, CHANnel2), external trigger channel (EXT), AC Line (Mains
supply) or digital channel (Digital).
In EDGE mode, could be CHANnel, EXT, ACLine or DIGital;
In PULSe mode, could be CHANnel, EXT or DIGital;
In SLOPe mode, could be CHANnel or EXT;
In VIDEO mode, could be CHANnel or EXT;
Thereinto, could be 1 or 2; the range of is 0~15.

Returned Format:

This manual is related to the following products:

DS1000E