Trigger:level, Trigger:sweep – RIGOL DS1000D User Manual

Page 35

RIGOL

Programming Guide for DS1000E, DS1000D Series

2-23

The query returns CH1, CH2, EXT, ACLINE, D0~D15.

Example:
:TRIG:EDGE:SOUR CHAN1 Setup the soure of edge trigger as CHANnel1.
:TRIG:EDGE:SOUR?

The query returns CH1.

3. :TRIGger:LEVel

Command Format:
:TRIGger:LEVel
:TRIGger:LEVel?

Function Explanation:
The commands set and query the trigger level. could be :EDGE, :PULSe
or :VIDEO; the range is: -6*Scale~+6*Scale, Scale indicates the current vertical
scale, the unit is V/div.

Returned Format:
The query returns the setting value of in V.

Example:
:TRIG:EDGE:LEV 1 Setup the level of EDGE trigger as 1.
:TRIG:EDGE:LEV?

The query returns 1.00e+00.

4. :TRIGger:SWEep

Command Format:
:TRIGger:SWEep {AUTO|NORMal|SINGle}
:TRIGger:SWEep?

Function Explanation:
The commands set and query the trigger type. could be :EDGE,
:PULSe, :SLOPe, :PATTern or :DURation.

Returned Format:
The query returns AUTO, NORMAL or SINGLE.

This manual is related to the following products:

DS1000E