RIGOL DS1000D - Manual (Page 63)

Command Systems RIGOL
Programming Guide for DS1000E, DS1000D Series
2-51
1. :MATH:DISPlay
Command Format:
:MATH:DISPlay {ON|OFF}
:MATH:DISPlay?
Function Explanation:
The commands set and query the On/Off state of the math operation.
Returned Format:
The query returns ON or OFF.
Example:
:MATH:DISP ON Enable math operation.
:MATH:DISP?
The query returns ON
2. :MATH:OPERate
Command Format:
:MATH:OPERate
:MATH:OPERate?
Function Explanation:
The commands set and query the math operation type of the current channel.
could be A+B, A-B, AB or FFT.
Returned Format:
The query returns A+B, A-B, A*B or FFT.
Example:
:MATH:OPER A-B Setup the operation as A-B.
:MATH:OPER? The query returns A-B.
3. :FFT:DISPlay
Command Format:
:FFT:DISPlay {ON|OFF}