RIGOL DS1000D - Manual (Page 23)

Command Systems RIGOL
Programming Guide for DS1000E, DS1000D Series
2-11
1. :DISPlay:TYPE
Command Format:
:DISPlay:TYPE
:DISPlay:TYPE?
Function Explanation:
The commands set and query the display type between sampling points.
could be VECTors ( vectir display) or DOTS (point display).
Returned Format:
The query returns VECTORS or DOTS.
Example:
:DISP:TYPE VECT Setup the display type as VECTors.
:DISP:TYPE?
The query returns VECTORS.
2. :DISPlay:GRID
Command Format:
:DISPlay:GRID
:DISPlay:GRID?
Function Explanation:
The commands set and query the state of the screen grid. could be FULL
(open the background grid and coordinates), HALF (turn off the background grid)
or NONE (turn off the background grid and coordinates).
Returned Format:
The query returns FULL, HALF or NONE.
Example:
:DISP:GRID FULL
Open the background grid and coordinates.
:DISP:GRID? The query returns FULL.
3. :DISPlay:PERSist