Measure:vamplitude, Measure:vtop, Measure:vbase – RIGOL DS1000D User Manual

Page 73

Text mode
Original mode

RIGOL

Programming Guide for DS1000E, DS1000D Series

2-61

Function Explanation:
The command queries the minimum of the waveform under measure.
could be CHANnel1 or CHANnel2.

Returned Format:
Such as: -2.52e+03, the unit is V.

5. :MEASure:VAMPlitude?

Command Format:
:MEASure:VAMPlitude? []

Function Explanation:
The command queries the amplitude of the waveform under measure.
could be CHANnel1 or CHANnel2.

Returned Format:
Such as: 5.07e+03, the unit is V.

6. :MEASure:VTOP?

Command Format:
:MEASure:VTOP? []

Function Explanation:
The command queries the top value of the waveform under measure.
could be CHANnel1 or CHANnel2.

Returned Format:
Such as: 2.55e+03, the unit is V.

7. :MEASure:VBASe?

Command Format:
:MEASure:VBASe? []

This manual is related to the following products:

DS1000E