Epson AcuLaser CX37DNF - Manual (Page 55)

Notes A single digit number, such as "1", cannot be input as "001".
Align the number on the left and input "1" as "1 _ _". Use the l and r keys to move
between triplets.
The Back key can also be used for deleting. To cancel IP Address menu, hold down
the Back key for more than one second, and then press the Back key again after all
settings have been cleared.
DHCP
Purpose If there is a DHCP server on the network, specifies whether the IP address and
other network information is automatically assigned by the DHCP server.
Options DISABLE /ENABLE
Default ENABLE
BOOTP
Purpose If there is a BOOTP server on the network, specifies whether the IP address and
other network information is automatically assigned by the BOOTP server.
Options DISABLE /ENABLE
Default DISABLE
ARP/PING
Purpose If the IP address cannot be acquired due to the DHCP or BOOTP address and if a
fixed IP address cannot be acquired, the destination IP address of the ICMP (Ping)
packet previously received by the machine can be acquired as the IP address of
the machine.
Options DISABLE /ENABLE
Default DISABLE
HTTP
Purpose Select whether or not to enable HTTP.
Options DISABLE /ENABLE
Default ENABLE
Epson AcuLaser CX37 Series Reference Guide
Understanding the Network Setting Menu 55